Bycol Clear

• Bycol Clear 1lts
• Bycol Clear 5lts
• Bycol Clear 20lts

Typical Uses:

Diggers Bycol Clear is an air-entraining admixture used to improve the workability of brickwork mortars and concrete mixes. FATTY Sand: Add 25mls to the gauging water used for each 40kg bag of cement or 250mls per every 200 litres of water.

Efflock

Controlling Water Absorption

• Efflock 1lt
• Efflock 5lts
• Efflock 20lts
  Efflock Tech Data SheetDownload

MAXPLUG

• 5kg Cans
• 1kg Handy Pack

MAXPLUG is a quick-setting cement-based mortar that instantly stops running water from cracks, holes or other openings in concrete, masonry and other substrates.

MAXBRUSH – Fibre Type

Application: MAXSEAL FLEX is applied with a fibre type brush or broom such as MAXBRUSH or MAXBROOM, or by trowel. DO NOT APPLY USING ROLLERS

Gripset GP general purpose primer 15 lts

• Bycol Clear 1lts – 1 litre per 8-10m² per coat
• Bycol Clear 5lts – 5L Container
• Bycol Clear 15lts – 15L Container

Gripset GP Primer is a fast-drying, water-based primer that improves adhesion on porous substrates such as concrete, masonry, screed, and plasterboard. Dry time: 30 minutes at 23°C/50% RH. Colour: Wet – Milky White, Dry – Clear. Packaging: 5 & 15L. Related products: BRW HD, BRW PFN, 38FC, LS, Xpress Multi Pro Membrane, 2P.

Gripset 38FC sbr fast cure membrane 15lt

• GRIPSET 38FC 5L – Fast curing, fibre reinforced waterproofing membrane
• GRIPSET 38FC 15L – Fast curing, fibre reinforced waterproofing membrane

GRIPSET 38FC is a water-based, fast-curing, fibre-reinforced SBR latex membrane for internal and external waterproofing. Flexible, durable, and low in water vapour transmission, it allows tiling or toppings after 4 hours and can be flood tested after 24 hours. Suitable for horizontal and vertical surfaces, it can be applied by brush, roller, or spray. Coverage: 1.5 L/m² over 2 coats. Dry times: Recoat – 1 hr, Tiling – 4 hrs, Flood test – 24 hrs. Colour: Blue. Packaging: 5 L and 15 L. Related products: Elastoproof Corners, Elastoproof B50, Elastoproof Base Collars, 11Y, GP, OP, LS, C-BED, E60, XpressLay.

Gripset C-1P 1part flexible cementitious membrane

• GRIPSET C-1P 5 kg – Fibre-reinforced flexible cementitious waterproof membrane
• GRIPSET C-1P 10 kg – Fibre-reinforced flexible cementitious waterproof membrane
• GRIPSET C-1P 15 kg – Fibre-reinforced flexible cementitious waterproof membrane

GRIPSET C-1P is a one-component, fibre-reinforced cementitious membrane for positive and negative waterproofing. Flexible and crack-bridging, it withstands UV, damp surfaces, and hydrostatic pressures up to 5 bar positive/1.5 bar negative. Ready-to-use with water, it can be applied by brush, roller, trowel, or texture spray. Dry times: Pot life – 1 hr, Recoat – 2–4 hrs, Tiling – 24 hrs, Exposure to water pressure – 7 days, Immersion – 10 days. Colour: Wet – Dark Grey, Dry – Dark Brown. Packaging: 15 kg bag. Related products: Elastoproof Corners, Elastoproof B50, Elastoproof Base Collars.

Elastoproof B50  bond breaker joint bond

• B50 Joint Band 120 mm × 50 m – High-performance waterproofing and sealing band
• B10 Joint Band 120 mm × 10 m – High-performance waterproofing and sealing band
• B50 Joint Band (Other sizes available) – Flexible bond breaker for movement zones

B50 Joint Band is an innovative detailing system for waterproofing and sealing joints, junctions, and areas subject to movement. Made from high-grade rubber, it offers high elongation, rupture resistance, and up to 100% elastic recovery. Suitable for wall/floor junctions, substrate abutments, and control, movement, and expansion joints. Colour: Grey. Packaging: 120 mm × 50 m roll; 120 mm × 10 m roll (B10). Related products: 38FC, LS, Xpress Multi Pro Membrane, C-1P, 2P, P39.